Ethernet Surge Protector 8p rack-mount in AT / AF.
The device allows the addition of PoE power in the UTP and FTP twisted pair, and at the same time provides effective protection of devices working in the Ethernet network against harmful electrostatic discharges and overvoltages.
It provides device protection - with a connection rate up to 1 Gb / s inclusive - compatible with the PoE AT / AF standard, allowing you to select the A / B power supply method / options .
Protects each cable in a four-pair cable by discharging any load to the ground. It signals the selected power method with LEDs. It is an effective and cost-effective solution before the destruction or damage of protected devices.
Ethernet Surge Protector collects inductive loads in the network and safely leads them to ground, which effectively prevents damage caused by overvoltages. Do not give voltages to the "LAN IN" ports.
The aesthetic powder-coated aluminum housing in white is ideally suited to the design of devices from the Cloud Core Router series by MikroTik. Rack holders give the possibility of mounting a compartment's stain.
The module is used for mounting in the Ethernet Surge Protector SPG-8P-1U 802.3af / at.
|Number of LAN ports |
Number of PoE ports
Maximum voltage PoE PoE
supply via twisted pair
Maximum current drawn from one port
Current at which the port is closed
Length of the earthing conductor
|8 x 10/100 / 1000Mbps |
8 x 10/100 / 1000Mbps 12-54VDC
(4.5 +), ( 7.8- )
146mm x 84mm x 34mm
LSEZ "EURO DK" SIA
Satiksmes str. 6, Liepaja, LV3401, Latvia
|MONEY BACK GUARANTEE|