Ethernet Surge Protector 8P PoE 1U Gigabit 802.3af/at SPG-8P-1U 802.3af/at Cyberteam

Ethernet Surge Protector 8p in a rack housing operating in AT / AF standard.

The device allows the addition of PoE power in the UTP and FTP twisted pair, and at the same time provides effective protection of devices working in the Ethernet network against harmful electrostatic discharges and overvoltages.

It provides device protection - with a connection rate up to 1 Gb / s inclusive - compatible with the PoE AT / AF standard, allowing you to select the A / B power supply method / options .

Protects each cable in a four-pair cable by discharging any load to the ground. It signals the selected power method with LEDs. It is an effective and cost-effective solution before the destruction or damage of protected devices.

Ethernet Surge Protector collects inductive loads in the network and safely leads them to ground, which effectively prevents damage caused by overvoltages.

The aesthetic powder-coated aluminum housing in white is ideally suited to the design of devices from the Cloud Core Router series by MikroTik. Rack holders give the possibility of mounting a compartment's stain.

Expandable with additional Ethernet modules Surge Protector SPG-8P. Protection of 24 ports at maximum expansion.

Key features:

Number of LAN ports - 8 x 10/100 / 1000Mbps

Number of PoE ports - 8 x 10/100 / 1000Mbps 

Supply voltage - 12-54VDC

Maximum voltage PoE - 54V

power supply via twisted pair - (4.5 +), ( 7.8- )

Maximum current drawn from one port - 1A

Current at which the port is closed -1.4

Protected pairs - 1-2,3-6,4-5,7-8

Slot type - RJ-45 shielded

Dimensions - 485mm x 110mm x 45mm 

Length of the earthing cable - 30cm

Weight - 0.725kg